BGO-02 Gyro Borehole Orientation Probe
The BGO-02 borehole orientation probe is a digital probe that measures the position of the probe within the borehole relative to the starting position of the survey. The position of the probe is reported two times per second. The probe is equipped with two gyro sensors. The first gyros spin axis is aligned with the axis of the borehole probe and the second gyros spin axis is at right angle to the probe axis. The gyro sensor is a gimbal mounted rotating mass sensor measuring the rate changes of the probe relative to the spinning axis of the rotating mass. The change of orientation of the borehole is measured on two axes on each gyro. The dip of the probe is measured with a two-axes tilt meter. Internally the microprocessor scales and calibrates all the measurements to engineering units before transmitting it to the surface.
The BGO-02 borehole orientation probe interfaces to all IFG logging systems. A typical system consists of a wire line winch equipped with a four conductor logging cable. A digital data interface (BIN-04), a optional depth encoder and a laptop computer.
The interface console supplies the power to the probe and receives the data from the sensors. This data is converted to a standard ASCII format by the console. Additional information like the depth of the probe and other external data can be appended to the data string. The ASCII data string is then transmitted via RS-232 data interface to a laptop or pen computer for the display and recording of the data to the disk drive.
The data acquisition software is the part that is specially designed for the orientation survey. It gives the operator the capability to enter the starting position or collar orientation of the borehole. The survey is generally run in continues mode at speeds of 10 to 15m per minute. The raw data is recorded for the post processing and plotting of the final survey results.
SPECIFICATIONS | |
SENSOR DESIGN | Gimbal mounted rotating mass |
ROTATION SPEED | 15000 rpm |
SENSITIVITY | 0.0001 Deg |
MAXIMUM RESPONSE | 100 Deg/Sec |
DYNAMIC RANGE | 360 Deg |
MAXIMUM LOAD | 1000g |
VIBRATION: | |
RANDOM (20-2000Hz) | 30g |
SHOCK | 600g, 30msec |
TILT: | |
DYNAMIC RANGE | +/-90o |
SENSITIVITY | 0.01o |
SAMPLE PERIOD | 2 samples per second |
PROBE HOUSING | Stainless steel |
MAXIMUM DEPTH | 2000 m |
TEMPERATURE RANGE |
Storage: -35o to +70oC Operating 0oC to +70oC |
OUTPUT | 10 mA current loop, 4800 baud |
SUPPLY VOLTAGE | 48 VDC, @ 0.3 (at probe header) |
PROBE DIMENSIONS | 40 mm diameter x 170 cm long |
PROBE WEIGHT | 6.8 kg |