BW-1000 Borehole Logging Winch

The BW-1000 series of borehole geophysical borehole winches are ideally suited for truck-mounted applications that require continuous logging at speeds from 0.3 to 30 meters per minute. It is designed to hold up to 1000m of 6mm four-conductor polyurethane-jacketed borehole cable. Smaller drums with 500m of cable are also available. The winch is driven by a 0.5 Hp electric motor. The cable is wound onto the drum evenly with a mechanical level wind mechanism. The winch is equipped with a disk break for either continues or emergency breaking. The basic construction of the winch consists of 2 cast aluminum side plates joined together with aluminum posts. This provides the support for the cable drum and the level wind. The winch is designed with an easy removable cable drum. This feature enables the quick replacement of the cable drum for maintenance and or for transportation to a new site.

The BW-1000 winch comes with a detachable crank handle for manual operation. The electrical connection for the probe is made with a 4-conductor slip ring that is totally enclosed inside the drum for protection from the environment.

 

SPECIFICATIONS
WIDTH X DEPTH X HEIGHT 50 x 86 x 65cm
WEIGHT 75 kg (with motor)
CAPACITY 1000 m of BLC-04 cable
CABLE WEIGHT 68kg /1000m
SLIP RINGS 4 conductor, silver graphite
Optional 6-conductor slip ring
INPUT POWER 120 or 240 VAC, 50, 60, Hz
OUTPUT POWER 0.5 Hp (0.75 Hp optional)
DRUM ID X OD X LENGTH 17.8 X 61 X 17.5cm
GEAR RATIO 25/4/1(motor / crank / drum)

 

BW-1000 Borehole Logging Winch