BMP-05 Multi-Parameter Borehole Probe
The BMP-05 is a combination probe designed to measure a wide range of physical rock properties in a borehole. The probe is equipped with the following sensors:
- 3 component magnetometer
- Magnetic susceptibility sensor
- 16”& 48” normal resistivity arrays
- Temperature sensor
- Tilt sensor
- Natural gamma sensor
The BMP-05 is controlled by an on-board microprocessor, which can sample up to 9 separate sensors at a rate of 2 Hz with up to 24 bits of resolution. The sensors are contained in a non-magnetic, non-conductive
housing which is pressure rated to 2000 meters. The BMP-05 is compatible with the BIN-04 digital data interface and IFG Corporation’s standard 4 conductor logging cable.
The BMP-05 is a cost-effective way to obtain a number of geophysical logs in a single survey run. The probe provides natural gamma, resistivity and magnetic logs for lithology mapping, temperature logs for fracture mapping and water flow determination, and vector and tilt information for performing borehole deviation and vector magnetic surveys.
SENSOR SPECIFICATIONS | |||
SENSOR | TYPE | RANGE | SENSITIVITY |
Magnetometer | Fluxgate | +/-100,000nT | 0.1nT |
Tiltmeter | Transducer | 0 to 80o | 0.1o |
Susceptibilty | Induction | 105 to 10-1 cgs | 10x105 cgs |
Resistivity | 16”& 48” | 0 to 50,000 ohm-m | 1ohm-m |
Gamma | CsI crystal | 0 to 200000CPS | 1 CPS |
Temperature | Thermistor | 0 to 50oC | 0.0001oC |
PROBE SPECIFICATIONS | |
ELECTRODES | Naval brass |
HOUSING | High strength filawounds tube |
MAXIMUM DEPTH | 2000 meters |
CONNECTION | 4 pin connector (Gearhardt Owen) |
TEMPERATURE RANGE |
Storage: -35 to +70oC Operating: 0 to +70oC Extended: 0 to +120oC |
SAMPLING RATE | 2 Hz |
OUTPUT | 20mA current loop, 4800 baud |
SUPPLY VOLTAGE | 24VDC @ 5W (at probe header ) |
DIMENSIONS | 40 mm diameter x 2.1 meter long |
WEIGHT | 5.6 kg |